The MT-3405D™
Dual Channel Automatic
Rate Controller

The New MT-3405D Dual Channel Automatic Rate Controller simultaneously controls the application of TWO products from one controller!
  • Easy to use, eliminates cab clutter with one unit!
  • System operates in either "standard" mode where channel 2 controls a single independent boom with programmable width, or "injection" mode where channel 2 responds to channel 1 boom switches and widths
  • Heavy-duty console with built-in boom controls
  • Controls any combination of liquid, granular or NH3 products
Features:
  • Built-in capability for VRA
  • Records area and volume in 3 independent pairs of counters for each control channel so individual jobs may be tracked
  • Tank counter shows amount remaining in tank for each channel
  • Low Tank Alarm: "Fill" flashes in display when tank level is low (settable)
  • Troubleshooting enhancements including "No Speed" and "No Flow" messages
  • Independent on-the-go rate adjustment for each control channel in Auto control mode
  • Each channel has independent auto/manual control for spot treatments
  • Minimum flow feature to ensure proper application pattern as ground speed slows to extremes
  • Precise rate control regardless of field conditions
  • Flow-based control
  • Controls electric and hydraulic valves/motors
  • Master hold turns both channels ON or OFF simultaneously
For more information on the new MT3405D™, give us a call at 800-328-9613.


Micro-Trak Systems, Inc. 800-328-9613
P.O. Box 99, 111 E. LeRay Avenue
Eagle Lake, MN 56024
Contact Us | Privacy Policy| Terms of Use
©1999-2008 Micro-Trak. All Rights Reserved.

Reading this literature requires Adobe Acrobat Reader. A FREE version can be downloaded from the link below.